中文名称: 伐昔洛韦  一键复制产品信息
英文名称: Valacyclovir
CAS No: 124832-26-4
分子式: C13H20N6O4
分子量: 324.34
V10092 伐昔洛韦 ≥98% (普西唐-psaitong)
包装规格:
10mg 50mg 250mg in glass bottle
产品描述:

基本信息

产品编号:V10092

产品名称:Valacyclovir

CAS:

124832-26-4

 

储存条件

粉末

-20℃

四年

分子式:

C13H20N6O4

分子量

324.34

化学名: 

2-[(2-amino-6-oxo-3H-purin-9-yl)methoxy]ethyl (2S)-2-amino-3-methylbutanoate

 

Solubility (25°C)

 

体外

DMSO

 

Ethanol

 

Water

 

体内

现配现用

 

1mg/ml表示微溶或不溶。

普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。

 

生物活性

产品描述

一种口服有效的抗病毒药物,可以抑制单纯疱疹,带状疱疹和疱疹 B。

靶点/IC50

HSV-1

2.9μg/mL (IC50)

 

体外研究

Valacyclovir (Valaciclovir; VACV) uptake was concentration dependent and saturable with a Michaelis-Menten constant and maximum velocity of 1.64mM and 23.34nmol/mg protein/5 min, respectively. A very similar Km value was obtained in hPEPT1/CHO cells and in rat and rabbit tissues and Caco-2 cells, suggesting that hPEPT1 dominates the intestinal transport properties of VACV in vitro.

 

体内研究

For treatment of a first episode of genital herpes, a large comparative trial has shown that Valacyclovir (1g twice a day) is as effective as acyclovir (200mg five times a day) when given for 10 days. For treating recurrences, two trials show that valacyclovir is as effective as acyclovir (200mg five times a day) with a treatment period of 5 days. A daily dose of 1g of valacyclovir is as effective as 2g daily. Valacyclovir can be administered once a day.

The concentrations of acyclovir in serum and CSF were measured at steady state after 6days of oral treatment with 1,000mg of valacyclovir three times a day.

EC50 values of PE and AC in 3T3 cells were 0.02 and 0.01ug/ml, while values in BHK cells were 0.2 and 0.03ug/ml. Treatment of infected immunosuppressed mice and FA and VA (b.i.d., 5.5days) reduced the proportion with erythema from 100% to 24% and 38%, and eliminated ear paralysis, ear lesions (vesicles, etc) and death. Virus was absent from ear and brainstem by day 6, but reappeared after discontinuation in mice treated with VA.

保存条件:
-20℃
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):
请在下列方框中输入相关信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
举例:给药剂量是10 mg/kg,每只动物体重20g,给药体积100 μL, TargetMol | Animal experiments  一共给药动物10只,您使用的配方为5%TargetMol | reagent DMSO 30%PEG300 5%Tween 80 60%Saline/PBS/ddH2O, 那么您的工作液浓度为2mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent  ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们客服联系。
体内配方的制备方法: 取 50μLDMSOTargetMol | reagent  母液,添加 300 μLPEG300TargetMol | reagent  混匀澄清,再加 50μLTween80, 混匀澄清,再加 600μLSaline/PBS/ddH2OTargetMol | reagent ​ 混匀澄清

方案所需的各种助溶剂如: DMSO , PEG300 / PEG400 , Tween 80 , SBE-β-CD , 玉米油 等, 均可点击跳转或在网站搜索购买。
 
以上为“动物实验计算换算器”的使用方法举例,并不是具体某个试剂的配制,请根据您的实验动物和给药方式选择适当的溶解方案。
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系普西唐客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多