中文名称: 吡罗达韦  一键复制产品信息
英文名称: Pirodavir
CAS No: 124436-59-5
分子式: C21H27N3O3
分子量: 369.46
P10613 吡罗达韦 ≥98% (普西唐-psaitong)
包装规格:
5mg 10mg 25mg 50mg 100mg in glass bottle
溶解性:
溶于DMSO(10 mg/mL 超声)
产品描述:

基本信息

产品编号:P10613

产品名称:Pirodavir

CAS:

124436-59-5

 

储存条件

粉末

-20℃

四年

 

 

分子式:

C21H27N3O3

溶于液体

-80℃

六个月

分子量

369.46

-20℃

一个月

化学名: 

ethyl 4-(2-(1-(6-methylpyridazin-3-yl)piperidin-4-yl)ethoxy)benzoate

 

Solubility (25°C)

 

体外

DMSO

10 mg/mL (27.07mM; Need ultrasonic)

Ethanol

  

Water

 

体内

现配现用

 

1mg/ml表示微溶或不溶。

普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。

 

制备储备液

 

浓度

 

溶液体积

质量

 

1mg

 

5mg

 

10mg

1mM

2.7067mL

13.5333mL

27.0665mL

5mM

0.5413mL

2.7067mL

5.4133mL

10mM

0.2707mL

1.3533mL

2.7067mL

 

生物活性

产品描述

一种有效的小核糖核酸病毒抑制剂,高效作用于 A 和 B 型鼻病毒。

靶点/IC50

Rhinovirus

 

体外研究

Pirodavir is a potent, broad-spectrum picornavirus inhibitor. Pirodavir inhibits 80 of the 100 human rhinovirus (HRV) strains tested at a concentration of 64ng/mL. In that same study, Pirodavir is also effective in inhibiting 16 enteroviruses, with a mean 80% inhibitory concentration (IC80) of 1,300ng/mL. Pirodavir inhibits enterovirus 71 replication with an IC50 of 5,420nM and an IC90 of >13,350nM. Pirodavir inhibits 56 rhinovirus laboratory strains and three of the clinical isolates tested.

Pirodavir inhibits 59% of the serotypes and isolates with IC50s of <100nM. Pirodavir concentrations of 16 and 4μg/mL reduces cell growth by 66% (s.e.m. 0.75) and 28% (s.e.m. 0.25), respectively. Lower concentrations (1μg/mL) of Pirodavir are not inhibitory for cell growth. The 50% cytotoxic concentration of pirodavir for logarithmic cell growth at 37°C is 7μg/mL.Under the conditions of the antiviral assay (confluent HeLa cells at 33°C), the 50% cytotoxic concentration is >50μg/mL.

 

推荐实验方法(仅供参考)

细胞实验:

 

Cell Assay

HeLa cells are seeded at a concentration of approximately 180,000 cells per dish in six-well plates containing 4mL of growth medium. Growth medium consist of Eagle's basal medium, supplemented with 5% fetal calf serum, 2% sodium bicarbonate,and 1% glutamine. After 24 h of incubation at 37°C in a humidified CO2 atmosphere, the growth medium is removed and replaced by the test solutions (fresh growth medium with or without various concentrations of the antiviral compounds). To assess the cytotoxicity of the antiviral compounds (e.g., Pirodavir), the number of living cells are determined present in triplicate cultures at the time of Pirodavir addition and every 24 h for 3 days. Following trypsinization, the number of viable cells for each drug concentration is counted in triplicate with a Coulter Counter.

保存条件:
-20℃
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):
请在下列方框中输入相关信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
举例:给药剂量是10 mg/kg,每只动物体重20g,给药体积100 μL, TargetMol | Animal experiments  一共给药动物10只,您使用的配方为5%TargetMol | reagent DMSO 30%PEG300 5%Tween 80 60%Saline/PBS/ddH2O, 那么您的工作液浓度为2mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent  ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们客服联系。
体内配方的制备方法: 取 50μLDMSOTargetMol | reagent  母液,添加 300 μLPEG300TargetMol | reagent  混匀澄清,再加 50μLTween80, 混匀澄清,再加 600μLSaline/PBS/ddH2OTargetMol | reagent ​ 混匀澄清

方案所需的各种助溶剂如: DMSO , PEG300 / PEG400 , Tween 80 , SBE-β-CD , 玉米油 等, 均可点击跳转或在网站搜索购买。
 
以上为“动物实验计算换算器”的使用方法举例,并不是具体某个试剂的配制,请根据您的实验动物和给药方式选择适当的溶解方案。
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系普西唐客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多