中文名称: MP7  一键复制产品信息
英文名称: MP7
CAS No: 1001409-50-2
分子式: C28H22F2N4O4
分子量: 516.5
M11674 MP7 ≥98% (普西唐-psaitong)
包装规格:
5mg 10mg 50mg 100mg in glass bottle
溶解性:
溶于DMSO(≥100mg/mL)
产品描述:

基本信息

产品编号:

M11674

产品名称:

MP7

CAS:

1001409-50-2

 

储存条件

粉末

-20℃

四年

 

 

分子式:

C28H22F2N4O4

溶于液体

-80℃

6个月

分子量:

516.50

-20℃

1个月

化学名: 

1-[(3,4-difluorophenyl)methyl]-2-oxo-N-[(1R)-2-[(2-oxo-1,3-dihydrobenzimidazol-5-yl)oxy]-1-phenylethyl]pyridine-3-carboxamide;PDK1 inhibitor

Solubility (25°C):

 

体外:

 

DMSO

 

Ethanol

 

Water

 

体内(现配现用):

 

1mg/ml表示微溶或不溶。

普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。

 

制备储备液

 

浓度

 

溶液体积

质量

 

1mg

 

5mg

 

10mg

1mM

1.9361mL

9.6805mL

19.3611mL

5mM

0.3872mL

1.9361mL

3.8722mL

10mM

0.1936mL

0.9681mL

1.9361mL

 

生物活性

产品描述

一种磷酸肌醇依赖性激酶-1 (PDK1)抑制剂。

靶点

PDK1

体外研究

Cell counting of U87MG-derived glioma stem cells (GSCs) confirms that Alisertib and, to a minor extent, MP7 (PDK1 inhibitor) are able to decrease the number of viable cells. When combined together, GSC viability is further reduced with respect to single-treated cells. As observed in U87MG cells, when used at the highest concentrations (i.e.,1.5μM Alisertib and 2.5μM MP7),a significant enhancement in the number of dead cells is evidenced.Following 72h treatment,MP7 alone does not show a significant inhibition of glioblastoma multiforme (GBM) proliferation.MP7 has been shown to have only minimal effects on monolayer cell growth in several cancer cell lines,with IC50 values in the micromolar range.

 

推荐实验方法(仅供参考)

细胞实验:

 

The human GBM cells (i.e.,U87MG,U343MG,or ANGM-CSS) or the respective GSCs are seeded and incubated for the indicated times with the indicated concentrations of SA16 (1nM to 100μM),MP7 (2.5nM,25nM,250nM and 2.5μM),or Alisertib.When indicated,cells are treated with MP7 and Alisertib in combination.To verify GSC chemoresistance,U87MG or GSCs are incubated with 50μM TMZ for 72h.For the long-term treatment of cells,NSC or complete medium containing drugs is replaced every 3 days.Cell proliferation is determined using the MTS assay:the dehydrogenase activity in active mitochondria reduces MTS to the soluble formazan product,whose absorbance at 490nm is measured with an automated plate reader.The mean background from each test condition is subtracted,and the data are expressed as the percentage of untreated cells (control).IC50 values are derived from the sigmoid dose-response curve.The percentage of inhibition is calculated as 100% minus the percentage of cell proliferation.

保存条件:
-20℃
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):
请在下列方框中输入相关信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
举例:给药剂量是10 mg/kg,每只动物体重20g,给药体积100 μL, TargetMol | Animal experiments  一共给药动物10只,您使用的配方为5%TargetMol | reagent DMSO 30%PEG300 5%Tween 80 60%Saline/PBS/ddH2O, 那么您的工作液浓度为2mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent  ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们客服联系。
体内配方的制备方法: 取 50μLDMSOTargetMol | reagent  母液,添加 300 μLPEG300TargetMol | reagent  混匀澄清,再加 50μLTween80, 混匀澄清,再加 600μLSaline/PBS/ddH2OTargetMol | reagent ​ 混匀澄清

方案所需的各种助溶剂如: DMSO , PEG300 / PEG400 , Tween 80 , SBE-β-CD , 玉米油 等, 均可点击跳转或在网站搜索购买。
 
以上为“动物实验计算换算器”的使用方法举例,并不是具体某个试剂的配制,请根据您的实验动物和给药方式选择适当的溶解方案。
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系普西唐客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多