中文名称: 重组人转铁蛋白(TF)  一键复制产品信息
英文名称: Human Transferrin protein
CAS No:
分子量: 76.6kDa
PZ0313 重组人转铁蛋白(TF) ≥95%(SDS-PAGE) (普西唐-psaitong)
外观与性状:
冻干粉,冻干缓冲液为无菌的 PBS,pH 7.4。
产品简介:
Transferrin (Tf),is an iron transporter, which is mainly biosynthesized in the liver, and it can also be biosynthesized in the brain; i.e., by oligodendrocytes and the choroid plexus, cerebrospinal fluid (CSF) producing tissue. The CSF contains two Tf isoforms, brain-type Tf and serum-type Tf, which differ in their glycan structures. Brain-type Tf is uniquely glycolsylated with biantennary asialo- and agalacto-complex type N-glycans that carry bisecting β1,4-GlcNAc and core α1,6-Fuc.The glycans of serum-type Tf in the CSF are similar to those of Tf in serum. Biochemical analyses reveal that the apparent molecular size of brain-type Tf is smaller than that of serum-type Tf, and that hydrophobic patches are exposed on brain-type Tf as demonstrated by hydrophobic probe binding studies. Research indicates that brain-type Tf levels is decreased in idiopathic normal pressure hydrocephalus, in which CSF production is suspected to decrease, while brain-type Tf increased in spontaneous intracranial hypotension, in which CSF production is suspected to increase. These results suggest that brain-type Tf could be a biomarker of altered CSF production.
产品特点:
采用 LAL 法检测,每 1 μg 蛋白质中的 EU 含量小于 1.0。
保存条件:
本产品为冻干粉形式,建议:将冻干粉的重组人转铁蛋白(TF)产品保存于-20℃以下的干燥环境中。本产品溶解之后,可在4℃保存2-7天,长期使用请置于-20℃以下。为长期保存,推荐添加载体蛋白(0.1% HSA或者BSA),并酌情分装保存,避免反复冻融。
蛋白质ID:
P02787
基因ID:
7018
表达宿主:
人类胚胎肾细胞
蛋白长度:
重组人转铁蛋白由690个氨基酸组成,预测分子量为76.6 kDa。 在还原条件下,SDS-PAGE中人转铁蛋白的表观分子量约为70-100 kDa。
蛋白序列链接:
https://www.uniprot.org/uniprot/P02787
氨基酸序列:
Amino acid sequence derived from Human Transferrin protein isoform (P02787, Met 1-Pro 698) with a polyhistidine tag at the C-terminus was expressed.
种属:
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):
请在下列方框中输入相关信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
举例:给药剂量是10 mg/kg,每只动物体重20g,给药体积100 μL, TargetMol | Animal experiments  一共给药动物10只,您使用的配方为5%TargetMol | reagent DMSO 30%PEG300 5%Tween 80 60%Saline/PBS/ddH2O, 那么您的工作液浓度为2mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent  ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们客服联系。
体内配方的制备方法: 取 50μLDMSOTargetMol | reagent  母液,添加 300 μLPEG300TargetMol | reagent  混匀澄清,再加 50μLTween80, 混匀澄清,再加 600μLSaline/PBS/ddH2OTargetMol | reagent ​ 混匀澄清

方案所需的各种助溶剂如: DMSO , PEG300 / PEG400 , Tween 80 , SBE-β-CD , 玉米油 等, 均可点击跳转或在网站搜索购买。
 
以上为“动物实验计算换算器”的使用方法举例,并不是具体某个试剂的配制,请根据您的实验动物和给药方式选择适当的溶解方案。
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系普西唐客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多