中文名称: 赛度替尼  一键复制产品信息
英文名称: Cerdulatinib
CAS No: 1198300-79-6
分子式: C20H27N7O3S
分子量: 445.54
C14163 赛度替尼 98% (普西唐-psaitong)
熔点:
>211°C (dec.)
沸点:
741.9±70.0 °C(Predicted)
密度:
1.44±0.1 g/cm3(Predicted)
包装规格:
5mg 10mg 25mg 50mg 100mg in glass bottle
溶解性:
DMSO :≥ 30 mg/mL (67.33 mM) "≥" means soluble, but saturation unknown.
储备液保存:
-80°C, 2 years
-20°C, 1 year
体内实验:
1、请依序添加每种溶剂:10% DMSO→40% PEG300→5% Tween-80→45% Saline
Solubility: ≥ 2.5 mg/mL (5.61 mM); 澄清溶液
此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;再向上述体系中加入 50 μL Tween-80,混合均匀;然后再继续加入 450 μL 生理盐水 定容至 1 mL。
2、请依序添加每种溶剂:10% DMSO→90% Corn Oil
Solubility: ≥ 2.5 mg/mL (5.61 mM); 澄清溶液
此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液,此方案实验周期在半个月以上的动物实验酌情使用。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
靶点:
Tyk2:0.5nM(IC50);cJAK2: 6nM (IC50);JAK3: 8nM(IC50);JAK1: 12nM (IC50);Syk:32nM (IC50);MST1:4nM (IC50)
ARK5:4nM (IC50);MLK1: 5nM (IC50);FMS: 5nM (IC50);AMPK: 6nM (IC50);TBK1:10nM (IC50);MARK1:10nM (IC50)
PAR1B-a TSSK:13nM (IC50);MST2:14nM (IC50);GCK 15nM:(IC50);JNK3:18nM (IC50);Rsk2:20nM (IC50)
Rsk4:28nM (IC50);CHK1:42nM (IC50);Flt4:51nM (IC50);Flt3:90nM (IC50);Ret:105nM (IC50);Itk:194nM (IC50)
体外研究:
Cerdulatinib shows inhibitory effect on 60 CLL with IC50 ranging from 0.37 to 10.02 µM. Cerdulatinib induces apoptosis in CLL in association with MCL-1 down-regulation and PARP cleavage. Cerdulatinib (2μM) is able to overcome the support of the microenvironment and induces CLL cell death. Cerdulatinib (250-500 nM) blocks proliferation of ibrutinib-sensitive and ibrutinib-resistant primary CLL cells. Cerdulatinib also blocks proliferation of both ibrutinib-sensitive and ibrutinib-resistant primary CLL cells as well as BTKC481S-transfected cell lines, and blocks BCR and JAK-STAT signaling pathways. Furthermore, inhibition of SYK and JAK by cerdulatinib translates to downstream inhibition of AKT and ERK. Cerdulatinib inhibits the activity of NF-kB pathway. PRT062070 reduces the ability of stimulated B cells to upregulate cell-surface expression of the early activation marker CD69 (IC50=0.11 µM). PRT062070 exhibits differential potency against cytokine JAK/STAT signaling pathways. PRT062070 (1 or 3 µM) induces apoptosis in BCR-signaling competent NHL cell lines. Cerdulatinib demonstrates inhibitory activity against both ABC and GCB subtypes of DLBCL cells. Cerdulatinib also induces apoptosis in both GCB and ABC subtypes of DLBCL cell lines via caspase 3 and PARP cleavage. And cerdulatinib blocks cell cycle in both ABC and GCB subtypes of DLBCL via inhibition of RB phosphorylation and down-regulation of cyclin E. Cerdulatinib induces cell cycle arrest and apoptosis under the condition of BCR stimulation in all DLBCL cell lines. Besides, cerdulatinib blocks JAK/STAT and BCR signaling in both ABC and GCB DLBCL cell lines. Cerdulatinib induces cell death in primary human DLBCL samples. Cerdulatinib inhibits BCR-induced signals in a dose-dependent manner and most strongly between 0.3 to 1 μM. and particularly in IGHV-unmutated samples with greater BCR signaling capacity and response to IL4, or samples expressing higher levels of sIgM, CD49d+, or ZAP70+. Cerdulatinib overcomes anti-IgM, IL4/CD40L, or NLC-mediated protection by preventing upregulation of MCL-1 and BCL-XL; however, BCL-2 expression is unaffected. Furthermore, in samples treated with IL4/CD40L, cerdulatinib synergizes with venetoclax in vitro to induce greater apoptosis than either drug alone.
体内研究:
PRT062070 (0.5 mg/kg) results in a nonstatistically significant trend toward reduced ankle inflammation, whereas significant reductions in inflammation are achieved with the 1.5, 3, and 5 mg/kg doses. PRT062070 also affects anticollagen antibody formation. PRT062070 (15 mg/kg) suppresses upregulation of splenic B-cell surface CD80/86 and CD69, and inhibits BCR signaling and activation in the spleen after oral dosing in mice.
保存条件:
-20°C
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):
请在下列方框中输入相关信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
举例:给药剂量是10 mg/kg,每只动物体重20g,给药体积100 μL, TargetMol | Animal experiments  一共给药动物10只,您使用的配方为5%TargetMol | reagent DMSO 30%PEG300 5%Tween 80 60%Saline/PBS/ddH2O, 那么您的工作液浓度为2mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent  ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们客服联系。
体内配方的制备方法: 取 50μLDMSOTargetMol | reagent  母液,添加 300 μLPEG300TargetMol | reagent  混匀澄清,再加 50μLTween80, 混匀澄清,再加 600μLSaline/PBS/ddH2OTargetMol | reagent ​ 混匀澄清

方案所需的各种助溶剂如: DMSO , PEG300 / PEG400 , Tween 80 , SBE-β-CD , 玉米油 等, 均可点击跳转或在网站搜索购买。
 
以上为“动物实验计算换算器”的使用方法举例,并不是具体某个试剂的配制,请根据您的实验动物和给药方式选择适当的溶解方案。
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系普西唐客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多