中文名称: 醋酸氟卡尼
英文名称: Flecainide acetate
CAS No: 54143-56-5
分子式: C17H20F6N2O3.C2H4O2
分子量: 474.39
F10450 醋酸氟卡尼 ≥98% (psaitong)
包装规格:
10mg 50mg 100mg in glass bottle
溶解性:
溶于甲醇(10mg/mL)
产品描述:

基本信息

产品编号:

F10450

产品名称:

Flecainide acetate

CAS:

54143-56-5

 

储存条件

粉末

-20℃

四年

 

 

分子式:

C17H20F6N2O3.C2H4O2

溶于液体

-80℃

6个月

分子量:

474.39

-20℃

1个月

化学名: 

Benzamide,N-(2-piperidinylmethyl)-2,5-bis(2,2,2-trifluoroethoxy)-,monoacetate

Solubility (25°C):

 

体外:

 

DMSO

 

Ethanol

 

Water

 

体内(现配现用):

 

1mg/ml表示微溶或不溶。

普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。

 

制备储备液

 

浓度

 

溶液体积

质量

 

1mg

 

5mg

 

10mg

1mM

2.1080mL

10.5399mL

21.0797mL

5mM

0.4216mL

2.1080mL

4.2159mL

10mM

0.2108mL

1.0540mL

2.1080mL

 

生物活性

产品描述

能阻断位于心脏的Nav1.5钠离子通道,能抗心律失常。

靶点

Nav1.5

 

体外研究

Flecainide is a class 1C antiarrhythmic drug especially used for the management of supraventricular arrhythmia.Flecainide works by blocking the Nav1.5 sodium channel in the heart,causing prolongation of the cardiac action potential.in vitro:Under the current-clamp condition,flecainide (1-100 microM) prolonged the action potential duration at both the early and the late phases of repolarization in a concentration-dependent manner without affecting the resting membrane potential.At a holding potential (HP) of -120 mV,flecainide use-dependently blocked WT and G1306E I(Na) equally but was more potent on R1448C channels.For WT,the extent of block depended on a holding voltage more negative than the activation threshold,being greater at -90 mV as compared to-120 and -180 mV.in vivo:Flecainide (80-130mg/m(2) orally) resulted in termination of the tachycardia in all 8 patients.Acute pharmacological termination of arrhythmia occurred with oral flecainide loading in 1 and temporarily with intravenous esmolol loading in 1 patient.Adjuvant therapy in form of propranolol was used in 5 and digoxin in 2.

保存条件:
-20℃
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):