中文名称: [4-[(5,6-二苯基吡嗪基)(1-甲基乙基)氨基]丁氧基]乙酸
英文名称: (4-((5,6-Diphenylpyrazin-2-yl)(isopropyl)amino)butoxy)acetic acid
CAS No: 475085-57-5
分子式: C25H29N3O3
分子量: 419.52
D70940 [4-[(5,6-二苯基吡嗪基)(1-甲基乙基)氨基]丁氧基]乙酸 98% (psaitong)
熔点:
116 - 118°C
沸点:
602.1±55.0 °C(Predicted)
密度:
1.160g/ml
包装规格:
5mg 10mg 25mg 50mg 100mg in glass bottle
产品简介:
MRE-269 是 selexipag 的有效代谢物,同时为选择性的 IP 受体激动剂。
溶解性:
DMSO :50 mg/mL(119.18 mM;超声助溶)
储备液保存:
-80°C, 2 years
-20°C, 1 year
体内实验:
1、请依序添加每种溶剂:10% DMSO→40% PEG300→5% Tween-80→45% Saline
Solubility: 2.5 mg/mL (5.96 mM); 悬浊液; 超声助溶
此方案可获得 2.5 mg/mL的均匀悬浊液,悬浊液可用于口服和腹腔注射。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;再向上述体系中加入 50 μL Tween-80,混合均匀;然后再继续加入 450 μL 生理盐水 定容至 1 mL。
2、请依序添加每种溶剂:10% DMSO→90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.96 mM); 悬浊液; 超声助溶
此方案可获得 2.5 mg/mL的均匀悬浊液,悬浊液可用于口服和腹腔注射
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液 中,混合均匀。
3、请依序添加每种溶剂:10% DMSO→90% Corn Oil
Solubility: ≥ 2.5 mg/mL (5.96 mM); 澄清溶液
此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液,此方案实验周期在半个月以上的动物实验酌情使用。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
靶点:
IP:IP Receptor
体外研究:
MRE-269 induces endothelium-independent vasodilation of rat extralobar pulmonary artery (EPA). MRE-269 or other IP receptor agonists including epoprostenol, iloprost, treprostinil and beraprost increase cAMP levels in hPASMC. MRE-269 induces concentration-dependent vasodilation in LPA(+), LPA(-), and SPA(-).
体内研究:
The vasorelaxant effects of MRE-269 on rat small intralobar pulmonary artery (SIPA) and EPA are the same, while the other IP receptor agonists induce less vasodilation in SIPA than in EPA. MRE-269 produces substantial relaxation of rat small pulmonary artery, although its effects are only significant at high concentrations of above 10 μM (pEC50, 4.98±0.22). By contrast, in rat small pulmonary veins, MRE-269 only produces minimal relaxation over the whole concentration range, with only significant relaxation occurring at the two highest doses of MRE-269 of 10 and 100 μM.
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
保存条件:
-20°C
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):