中文名称: L-抗坏血酸 文献数量:1  一键复制产品信息
英文名称: L-Ascorbic acid
CAS No: 50-81-7
分子式: C6H8O6
分子量: 176.12
EINEC: 200-066-2
V10001 L-抗坏血酸 ≥99% (普西唐-psaitong)
熔点:
190-194°C
外观与性状:
白色粉末
包装规格:
100g 500g 1kg in poly bottle 5kg in poly drum
溶解性:
溶于水
储备液保存:
-80°C, 1 year
-20°C, 6 months
体内实验:
1、请依序添加每种溶剂: PBS
Solubility: 100 mg/mL (567.79 mM); 澄清溶液; 超声助溶 (<60°C)

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
靶点:
T-type calcium channel;Microbial Metabolite;
体外研究:
L-Ascorbic acid 的抗癌作用由钠依赖性维生素 C 转运蛋白 2 (SVCT-2) 决定,它是 L-Ascorbic acid 的转运蛋白。L-Ascorbic acid (0.1 μM-2 mM) 根据 SVCT-2 表达和 L-ascorbic acid 摄取表现出抗癌作用。人结直肠癌细胞系对 L-Ascorbic acid 表现出不同的反应,这主要取决于 SVCT-2 的表达水平。
体内研究:
L-Ascorbic acid/Tolbutamide 在正常 (60 mg/kg) 和糖尿病 (40 mg/kg) 条件下以剂量依赖性方式产生降血糖活性。在 L-Ascorbic acid 存在的情况下,与 Tolbutamide 匹配对照相比,Tolbuatmide (20 mg/kg) 起效早且维持时间更长。
细胞实验:
Cell Viability Assay
Cell Line: High SVCT-2 expressing cell lines Sw620, Sw480, LoVo, SNU-C4; Low SVCT-2 expressing cell lines HCT15, HCT116, DLD-1, CoLo-205
Concentration: 0, 0.1 μM, 1 μM, 10 μM, 0.1 mM, 0.5 mM, 1 mM, and 2 mM
Incubation Time: 24 hours
Result: Some high SVCT-2 expressing cancer cells demonstrated a dramatic cell-autonomous inhibitory effect of L-ascorbic acid.
Low SVCT-2 expressing cell lines showed biphasic responses to L-ascorbic acid.

Western Blot Analysis
Cell Line: Sw620, Sw480, LoVo, SNU-C4, HCT15, HCT116, DLD-1, CoLo-205 cell lines
Concentration: 1 mM
Incubation Time:
Result: The cell lines showed different levels of SVCT-2 expression in western blot analyses: Sw620, Sw480, and Lovo expressed high levels of SVCT-2 whereas HCT116, HCT15, and DLD-1 expressed low levels.
动物实验:
Animal Model: Normal rats:Albino rats of either sex weighing between 125-175 g
Dosage: Group I received L-ascorbic acid 60 mg/kg, Group II received Tolbutamide 20 mg/kg and Group III was given L-ascorbic acid (60 mg/kg) prior to the administration of tolbutamide 20 mg/kg
Administration: Administered orally
Result: L-ascorbic acid at the dose of 60 mg/kg produced 50.91% blood glucose reduction at 0.5 h and 20 mg/kg body weight of Tolbutamide produced 33% at 4 h as peak effects. In the presence of L-ascorbic acid (60 mg/kg), the action of Tolbutamide was early in onset and maintained for 6 h.

Animal Model: Diabetic rats:Albino rats of either sex weighing between 125 to 175 g were fasted overnight before injection with Alloxan
Dosage: Group I received L-ascorbic acid 40 mg/kg and Group II received Tolbutamide 20 mg/kg while Group III was given L-ascorbic acid 40 mg/kg prior to Tolbutamide administration (20 mg/kg).
Administration: Oral administration
Result: L-ascorbic acid (40 mg/kg alone) produced 42.53% blood glucose reduction at 1.5 h and Tolbutamide 20 mg/kg produced 45.09 at 4 h. Administration of L-ascorbic acid 40 mg/kg body weight prior to Tolbutamide produced antidiabetic activity at 0.5 h and was maintained for 6 h.
产品描述:

抗氧化剂 掩蔽剂 还原剂

保存条件:
室温
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)

分析证书(COA)

Lot/Batch Number

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):
请在下列方框中输入相关信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
举例:给药剂量是10 mg/kg,每只动物体重20g,给药体积100 μL, TargetMol | Animal experiments  一共给药动物10只,您使用的配方为5%TargetMol | reagent DMSO 30%PEG300 5%Tween 80 60%Saline/PBS/ddH2O, 那么您的工作液浓度为2mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent  ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们客服联系。
体内配方的制备方法: 取 50μLDMSOTargetMol | reagent  母液,添加 300 μLPEG300TargetMol | reagent  混匀澄清,再加 50μLTween80, 混匀澄清,再加 600μLSaline/PBS/ddH2OTargetMol | reagent ​ 混匀澄清

方案所需的各种助溶剂如: DMSO , PEG300 / PEG400 , Tween 80 , SBE-β-CD , 玉米油 等, 均可点击跳转或在网站搜索购买。
 
以上为“动物实验计算换算器”的使用方法举例,并不是具体某个试剂的配制,请根据您的实验动物和给药方式选择适当的溶解方案。
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系普西唐客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多
客户发表文献