中文名称: 鸢尾黄素
英文名称: Tectorigenin
CAS No: 548-77-6
分子式: C16H12O6
分子量: 300.26
T10157 鸢尾黄素 ≥98%(HPLC),分析标准品 (psaitong)
包装规格:
20mg in glass bottle
产品简介:
一种植物异黄酮,最初是从葛根汤干燥的花中分离出来的。
溶解性:
DMSO:120 mg/mL(399.65 mM)
储备液保存:
-80°C, 2 years
-20°C, 1 year
体内实验:
1、请依序添加每种溶剂: 10% DMSO→40% PEG300→5% Tween-80→45% saline
Solubility: ≥ 2.08 mg/mL (6.93 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL(饱和度未知)的澄清溶液。
以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO储备液加到 400 μL PEG300 中,混合均匀;再向上述体系中加入 50 μL Tween-80 ,混合均匀;然后再继续加入 450 μL 生理盐水 定容至 1 mL(工作液配制过程中,可通过加热/涡旋/超声等物理方式辅助溶解)。

2、请依序添加每种溶剂: 10% DMSO→90% (20% SBE-β-CD in saline)
Solubility: ≥ 2.08 mg/mL (6.93 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL(饱和度未知)的澄清溶液。
以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液 中,混合均匀(工作液配制过程中,可通过加热/涡旋/超声等物理方式辅助溶解)。
3、请依序添加每种溶剂: 10% DMSO→90% corn oil
Solubility: ≥ 2.08 mg/mL (6.93 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL(饱和度未知)的澄清溶液,此方案实验周期在半个月以上的动物实验酌情使用。
以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO储备液加到 900 μL玉米油中,混合均匀(工作液配制过程中,可通过加热/涡旋/超声等物理方式辅助溶解)。

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
体外研究:
Tectorigenin is a plant isoflavonoid originally isolated from the dried flower of Pueraria thomsonii Benth. Palmitic acid (PA)-stimulated ROS production is abolished by treatment with Tectorigenin for HUVECs in a dose-dependent manner (0.1, 1, 10 μM). Treatment with Tectorigenin attenuates enhanced IKKβ phosphorylation and effectively blocks NF-κB activation by inhibition of p65 phosphorylation at concentrations ranging from 0.1 to 10 μM. Tectorigenin treatment also effectively inhibits PA-augmented TNF-α and IL-6 production in a concentration dependent manner. The number of viable HepG2 cells treated by Tectorigenin decreases in a concentration- and time-dependent manner. When HepG2 cells are treated with Tectorigenin at 5, 10 and 20 mg/L for 24 h, the viability rate is 91%, 79% and 62%, respectively.
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
保存条件:
2-8℃
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):