中文名称: 3-TYP 促销  一键复制产品信息
英文名称: 3-TYP
CAS No: 120241-79-4
分子式: C7H6N4
分子量: 146.15
T10037 3-TYP 100%(HPLC) (普西唐-psaitong)
包装规格:
5mg 25mg 100mg in glass bottle
溶解性:
溶于DMSO(29mg/mL)、乙醇和水
产品描述:

基本信息

产品编号:T10037

产品名称:3-TYP

CAS:

120241-79-4

 

储存条件

粉末

-20℃

四年

 

 

分子式:

C7H6N4

溶于液体

-80℃

两年

分子量

146.15

-20℃

一个月

化学名: 

3-(1H-1,2,3-triazol-4-yl)pyridine

 

Solubility (25°C)

 

体外

DMSO

29mg/mL (198.42mM)

Ethanol

29mg/mL (198.42mM)

Water

1.25mg/mL warmed with 50ºC water bath (8.55mM)

体内

现配现用

 

1mg/ml表示微溶或不溶。

普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。

 

制备储备液

 

浓度

 

溶液体积

质量

 

1mg

 

5mg

 

10mg

1mM

6.8423mL

34.2114mL

68.4229mL

5mM

1.3685mL

6.8423mL

13.6846mL

10mM

0.6842mL

3.4211mL

6.8423mL

50mM

0.1368mL

0.6842mL

1.3685mL

 

生物活性

产品描述

一种选择性的SIRT3抑制剂,IC50:16nM。有比对SIRT1和SIRT2更强的选择性,对其IC50值为88nM 和 92nM。

靶点/IC50

SIRT3 
(cell-free)

SIRT1 
(cell-free)

SIRT2 
(cell-free)

16nM

88nM

92nM

体外研究

3-TYP inhibits melatonin-enhanced SIRT3 activity but does not affect SIRT3 protein expression. 3-TYP pretreatment reverses the protective effects of melatonin on cadmium (Cd)-induced mitochondrial-derived O2•− production and autophagic cell death. 3-TYP significantly attenuates melatonin-induced increases in deacetylated-SOD2 expression and SOD2 activity in HepG2 cells exposed to Cd.

体内研究

3-TYP (50mg/kg, i.p.) does not significantly influence the LVEF, LVFS, infarct size, serum LDH levels, apoptosis, and oxidative stress compared with those of the Sham group. Moreover, 3-TYP has little effect on gp91phox, Nrf2, NQO 1, Bax, Bcl-2,Caspase-3, and cleaved Caspase-3 expression levels, compared with the Sham group. 3-TYP significantly decreases SIRT3 activity and increases the acetylation of SOD2 compared with that in the control group, without influencing SIRT3 expression. 3-TYP attenuates the cardioprotective effects of melatonin by decreasing the LVEF and LVFS after 24 hour of reperfusion. 3-TYP also increases the infarct size, serum LDH levels, and apoptotic ratio compared with those in the IR+Mel group.

 

推荐实验方法(仅供参考)

细胞实验:

Cell Assay

Cell viability is analyzed using Cell Counting Kit-8. Briefly, 1×104  cells are inoculated into 96-well plates. After being treated,90μL of medium and 10μL of CCK-8 solution are added to each well. The cells are then incubated at 37°C for 2 h. After incubation, the absorption at 450nm is measured using an Infinite™ M200 Microplate Reader. The results are expressed as a percentage of the control. The cell death is also evaluated using the trypan blue assay. HepG2 cells are plated in the 6-well plates (5×105 cells per well) and incubated for 24 h. After being treated with Cd or melatonin, the cells are detached with 300μL trypsin-EDTA solution. The mixture of detached cells is centrifugated at 300 g for 5 min. Then, the residue is combined with 800μL trypan blue solution and dispersed. After 3 min staining, cells are counted using an automated cell counter. The dead cells are stained with the blue color. Cell mortality (%) is expressed as percentage of the dead cell number/the total cell number.

 

动物实验:

 

Animal Administration

In brief, male C57BL/6 mice are anesthetized with 2% isoflurane, and myocardial ischemia is produced by temporarily exteriorizing the heart via a left thoracic incision and placing a 6-0 silk suture slipknot around the left anterior descending coronary artery. After 30 minutes of myocardial ischemia, the slipknot is released, and the myocardium is reperfused for 3 hour (for western blot analysis and oxidative stress measurement) or 24 hour (for cardiac function, apoptotic index and infarct size determination). Sham-operated mice undergo the same surgical procedures except the suture placed under the left coronary artery is not tied. Ten minutes before reperfusion, mice are randomized to receive either vehicle (1% ethanol) or melatonin (20mg/kg) by intraperitoneal injection. C57BL/6 mice are randomly divided into the following groups: (i) Sham group: mice underwent the sham operation and are treated with vehicle (1% ethanol); (ii) Mel group: mice are treated with melatonin (20mg/kg via intraperitoneal injection); (iii) IR+V group: mice underwent the MI/R operation and are treated with vehicle (1% ethanol); (iv) IR+Mel group: mice underwent the MI/R operation and are treated with melatonin (20 mg/kg via intraperitoneal injection 10 minutes before reperfusion); (v) IR+Mel+3-TYP group: mice are pretreated with 3-TYP (3-TYP is intraperitoneally injected at a dose of 50mg/kg every 2 days for a total of three doses prior to the MI/R surgery), subjected to the MI/R operation, and treated with melatonin (20 mg/kg via intraperitoneal injection 10 minutes before reperfusion); and (vi) IR+3-TYP group: mice are pretreated with 3-TYP and then subjected to the MI/R operation.

保存条件:
-20℃
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)

分析证书(COA)

Lot/Batch Number

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):
请在下列方框中输入相关信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
举例:给药剂量是10 mg/kg,每只动物体重20g,给药体积100 μL, TargetMol | Animal experiments  一共给药动物10只,您使用的配方为5%TargetMol | reagent DMSO 30%PEG300 5%Tween 80 60%Saline/PBS/ddH2O, 那么您的工作液浓度为2mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent  ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们客服联系。
体内配方的制备方法: 取 50μLDMSOTargetMol | reagent  母液,添加 300 μLPEG300TargetMol | reagent  混匀澄清,再加 50μLTween80, 混匀澄清,再加 600μLSaline/PBS/ddH2OTargetMol | reagent ​ 混匀澄清

方案所需的各种助溶剂如: DMSO , PEG300 / PEG400 , Tween 80 , SBE-β-CD , 玉米油 等, 均可点击跳转或在网站搜索购买。
 
以上为“动物实验计算换算器”的使用方法举例,并不是具体某个试剂的配制,请根据您的实验动物和给药方式选择适当的溶解方案。
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系普西唐客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多