基本信息
产品编号: |
P10357 |
||||
产品名称: |
Picrocrocin |
||||
CAS: |
138-55-6 |
储存条件 |
粉末 |
2-8℃ |
四年 |
分子式: |
溶于液体 |
-80℃(避光) |
6个月 |
||
分子量: |
330.37 |
-20℃(避光) |
1个月 |
||
化学名: |
(R)-2,6,6-trimethyl-4-(((2R,3R,4S,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)tetrahydro-2H-pyran-2-yl)oxy)cyclohex-1-ene-1-carbaldehyde |
||||
Solubility (25°C): |
|||||
体外:
|
DMSO |
66mg/mL (199.77mM) |
|||
Ethanol |
|
||||
Water |
|
||||
体内(现配现用): |
1.请依序添加每种溶剂:10% DMSO→40% PEG300→5% Tween-80→45% saline Solubility:≥2.5mg/mL (7.57mM);Clear solution |
||||
此方案可获得 ≥ 2.5 mg/mL (7.57 mM,饱和度未知) 的澄清溶液。 以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。 |
|||||
2.请依序添加每种溶剂:10% DMSO→90%(20% SBE-β-CD in saline) Solubility:≥2.5mg/mL(7.57mM);Clear solution |
|||||
此方案可获得 ≥ 2.5 mg/mL (7.57 mM,饱和度未知) 的澄清溶液。 以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。 |
|||||
3.请依序添加每种溶剂:10% DMSO→90% corn oil Solubility:≥2.5mg/mL(7.57mM);Clear solution |
|||||
此方案可获得 ≥ 2.5 mg/mL (7.57 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。 以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。 |
|||||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1 mM |
3.0269 mL |
15.1345 mL |
30.2691 mL |
5 mM |
0.6054 mL |
3.0269 mL |
6.0538 mL |
10 mM |
0.3027 mL |
1.5135 mL |
3.0269 mL |
生物活性
产品描述 |
Picrocrocin,一种发现于椰菜花中的类胡萝卜素。Picrocrocin 具有抗癌作用。Picrocrocin 对 SKMEL-2 人恶性黑色素瘤细胞具有生长抑制作用。 |
靶点 |
Apoptosis |
体外研究 |
Picrocrocin exerted growth inhibitory effects on the SK-MEL-2 melanoma cells. The IC50 of picrocrocin against the SK-MEL-2 cells was 20 μM at 24-h incubation. The antiproliferative activity of picrocrocin was due to apoptosis and cell cycle arrest. In addition, picrocrocin enhanced the ROS levels and decreased the MMP levels of SK-MEL-2 cells. Finally, picrocrocin inhibited the JAK/STAT5 signalling pathway in the SK-MEL-2 melanoma cells. |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )