中文名称: | Lemildipine | ||||
---|---|---|---|---|---|
英文名称: | Lemildipine | ||||
别名: | 来米地平 NB-818;NPK-1886 | ||||
CAS No: | 94739-29-4 | 分子式: | C20H22Cl2N2O6 | 分子量: | 457.3 |
CAS No: | 94739-29-4 | ||||
分子式: | C20H22Cl2N2O6 | ||||
分子量: | 457.3 |
基本信息
产品编号: |
L10495 |
||||
产品名称: |
Lemildipine |
||||
CAS: |
94739-29-4 |
储存条件 |
粉末 |
-20℃ |
四年 |
|
|
||||
分子式: |
溶于液体 |
-80℃ |
6个月 |
||
分子量: |
457.30 |
-20℃ |
1个月 |
||
化学名: |
|||||
Solubility (25°C): |
|||||
体外:
|
DMSO |
|
|||
Ethanol |
|
||||
Water |
|
||||
体内(现配现用): |
|
||||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1mM |
2.1867mL |
10.9337mL |
21.8675mL |
5mM |
0.4373mL |
2.1867mL |
4.3735mL |
10mM |
0.2187mL |
1.0934mL |
2.1867mL |
生物活性
产品描述 |
一种钙通道阻滞剂。 |
靶点 |
Calcium entry |
体内研究 |
Gerbils are treated intraperitoneally with Lemildipine (0.1-3mg/kg) just after release of the occlusion.Four days after the ischemia,they are fixed by perfusing 10% buffered-formalin,and the neuronal cell density (NCD,cell/mm) in the CA1 subfield is estimated under microscopy.The average NCD in the ischemic control group is 43±10.8 cells/mm,whereas Lemildipine (3mg/kg) significantly ameliorates DND with an average NCD of 143±24.2 cells/mm (P<0.01).In addition,Lemildipine (3mg/kg) significantly inhibits delayed neuronal death (DND) at 1,2 and 4 weeks after transient ischemia:the average NCD of the Lemildipine and ischemic control groups are 80±9.4 (P<0.01) and 43±7.7 cells/mm,92±13.7 (P<0.05) and 52±9.3 cells/mm,and 57±5.0 (P<0.01) and 43±12.4 cells/mm,respectively.In this experiment,Lemildipine (NB-818) exhibits a protective effect on DND in the hippocampal CA1 subfield after transient forebrain ischemia, and its effect persisted for up to 4 weeks.In normal Wistar rats (NWR),Lemildipine (NPK-1886) in doses of 3-30mg/kg,p.o.,produces a mild lowering of blood pressure.The depressor effect of Lemildipine is much the same as that of Nifedipine. In contrast,Lemildipine produces a significant decrease in the blood pressure of spontaneously hypertensive rats (SHR).Oral administration of Lemildipine in doses of 3,10,30mg/kg produces a significant decrease in systolic blood pressure dose-dependently.The maximum decrease is observed 1-3hr after administration.Comparing the hypotensive potency of Lemildipine and Nifedipine,their dose-response curves at the maximum response during the observation (for 24hr) are analyzed by the least squares method,and the dose of 30% decrease in blood pressure from the control level (ED30) are used as a measure of their potency.Lemildipine is 1.4 times stronger than Nifedipine;the ED30 values of Lemildipine and Nifedipine are 10.2mg/kg and 14.3mg/kg,respectively. |
推荐实验方法(仅供参考)
动物实验: |
|
Gerbils Male Mongolian gerbils,weighing 50-80g,are used in this experiment.Lemildipine (3mg/kg) or vehicle is administered intraperitoneally just after the recirculation. At 1,2 or 4 weeks after ischemia,the animals are sacrificed,and the protective effect of Lemildipine (NB-818) is examined. Mice and Rats Normal Wistar rats (NWR) and hypertensive model rats (spontaneously hypertensive rats (SHR),renal hypertensive rats (RHR) and DOCA-saline-induced hypertensive rats (DOC-Na-R)) of the male sex, weighing from 250 to 350g,are used.Oral administration of Lemildipine in doses of 3,10,30mg/kg for normal Wistar rats (NWR).Lethal dose of Lemildipine and Nifedipine is determined by the Litchfield-Wilcoxon method from the data of experiments using healthy mice and rats.Mice (male and female) weighing 20±2g and male rats weighing from 150 to 220g are used.These two kinds of animals are fed on solid food (Crea,CA-1) and water ad lib.The animal room temperature and humidity are controlled at 22±2℃ and 55±5%,respecttively.No food except water is administered 24hr before starting the experiments for oral administration of drugs. |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )