中文名称: 木犀草素
英文名称: Luteolin
CAS No: 491-70-3
分子式: C15H10O6
分子量: 286.24
EINEC: 207-741-0
L10099 木犀草素 ≥98%(HPLC) (psaitong)
包装规格:
5g 25g 100g in poly bottle
产品简介:
一种多酚化合物,属于黄酮类。是强抗氧化剂和自由基清除剂。
溶解性:
熔点: ~330 °C (lit.)
储备液保存:
-80°C, 6 months
-20°C, 1 month
体内实验:
1、请依序添加每种溶剂:10% DMSO→90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (7.27 mM); 澄清溶液
此方案可获得 ≥ 2.08 mg/mL(饱和度未知)的澄清溶液。
以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液 中,混合均匀。
2、请依序添加每种溶剂:50% PEG300→50% Saline
Solubility: 20 mg/mL (69.87 mM); 澄清溶液; 超声助溶
<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
靶点:
PDE2(Cell-free assay):6.4 μM(Ki)
(Cell-free assay)PDE5:9.5 μM(Ki)
PDE4(Cell-free assay):11.1 μM(Ki)
PDE3(Cell-free assay):13.9 μM(Ki)
PDE1(Cell-free assay):15.0 μM(Ki)
体外研究:
Luteolin (0-160 µM; 24 hours; NCI-H460 cells) treatment inhibits the viability of NCI-H460 cells in a concentration-dependent manner.
Luteolin (20-80 µM; 24 hours; NCI-H460 cells) treatment causes an accumulation of cells in the S phase.
Luteolin (320-580 µM; 48 hours; NCI-H460 cells) treatment induces apoptosis.
Luteolin (20-80 µM; 24 hours; NCI-H460 cells) treatment increases the protein expression levels of apoptotic regulatory proteins, including the Bax/Bcl-2 ratio, in a concentration-dependent manner, however, only 80 µM Luteolin inhibits the expression of Bad. Luteolin also decreases the expression of Sirt1 in the NCI-H460 cell line in a concentration-dependent manner.
体内研究:
Luteolin (10-100 mg/kg; oral gavage; daily; for 12 weeks; adult male Wistar rats) has an antioxidant effect and can also protect against non-alcoholic steatohepatitis through targeting the pro-inflammatory IL-1 and Il-18 pathways in rats with a high carbohydrate/high fat diet.
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
保存条件:
2-8℃
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):