中文名称: | 弗斯特罗定扁桃酸盐 | ||||
---|---|---|---|---|---|
英文名称: | Fesoterodine L-mandelate | ||||
别名: | 非索罗定扁桃酸盐 2-[(1R)-3-[bis(1-methylethyl)amino]-1-phenylpropyl]-4-hydroxy-methylphenyl isobutyrate mandelate | ||||
CAS No: | 1206695-46-6 | 分子式: | C34H45NO6 | 分子量: | 563.72 |
CAS No: | 1206695-46-6 | ||||
分子式: | C34H45NO6 | ||||
分子量: | 563.72 |
基本信息
产品编号: |
F10706 |
||||
产品名称: |
Fesoterodine L-mandelate |
||||
CAS: |
1206695-46-6 |
储存条件 |
粉末 |
-20℃ |
四年 |
|
|
||||
分子式: |
溶于液体 |
-80℃ |
6个月 |
||
分子量: |
563.72 |
-20℃ |
1个月 |
||
化学名: |
2-[(1R)-3-[bis(1-methylethyl)amino]-1-phenylpropyl]-4-hydroxy-methylphenyl isobutyrate mandelate |
||||
Solubility (25°C): |
|||||
体外:
|
DMSO |
|
|||
Ethanol |
|
||||
Water |
|
||||
体内(现配现用): |
|
||||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1mM |
1.7739mL |
8.8697mL |
17.7393mL |
5mM |
0.3548mL |
1.7739mL |
3.5479mL |
10mM |
0.1774mL |
0.8870mL |
1.7739mL |
生物活性
产品描述 |
一种口服有效,非亚型选择性的,竞争性毒蕈碱受体 (mAChR) 拮抗剂。 |
|
靶点 |
pKi:8.0(M1),7.7(M2),7.4(M3),7.3(M4) and 7.5(M5) |
|
体外研究 |
Fesoterodine L-mandelate decreases micturition frequency,urgency severity and urgency incontinence episodes and increases the volume voided with each micturition.After oral administration,Fesoterodine L-mandelate is rapidly and extensively hydrolysed in plasma by nonspecific esterases to Desfesoterodine (5-hydroxymethyl tolterodine;SPM 7605;HY-76569;an active metabolite of Fesoterodine). |
|
体内研究 |
Fesoterodine L-mandelate (0.01-1mg/kg;IV) reduces the micturition pressure and increases bladder capacity and ICIs (intercontraction intervas) at the lowest dose tested of 0.01mg/kg. |
|
Animal Model: |
Bladders from female Sprague-Dawley rats (225-275g) |
|
Dosage: |
0.01,0.1 and 1mg/kg |
|
Administration: |
IV |
|
Result: |
Reduced the micturition pressure and increased bladder capacity and ICIs at the lowest dose tested of 0.01mg/kg. |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )