中文名称: EVP-6124盐酸盐
英文名称: Encenicline hydrochloride
CAS No: 550999-74-1
分子式: C16H18Cl2N2Os
分子量: 357.3
E70269 EVP-6124盐酸盐 ≥98% (psaitong)
包装规格:
2mg 5mg 10mg 25mg 50mg 100mg in glass bottle
产品简介:
Encenicline hydrochloride (EVP-6124 hydrochloride) 是一种新型 α7 神经元烟碱乙酰胆碱受体 (nAChRs)激动剂。
溶解性:
溶于DMSO( ≥ 50mg/mL)
储备液保存:
-80°C, 6 months
-20°C, 1 month
(sealed storage, away from moisture)
体内实验:
1、请依序添加每种溶剂: 10% DMSO→40% PEG300→5% Tween-80 →45% saline
Solubility: ≥ 2.5 mg/mL (7.00 mM); Clear solution
此方案可获得 ≥ 2.5 mg/mL (7.00 mM,饱和度未知) 的澄清溶液。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。
2、请依序添加每种溶剂: 10% DMSO→90% (20% SBE-β-CD in saline)
Solubility: ≥ 2.5 mg/mL (7.00 mM); Clear solution
此方案可获得 ≥ 2.5 mg/mL (7.00 mM,饱和度未知) 的澄清溶液。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。
3、请依序添加每种溶剂: 10% DMSO→90% corn oil
Solubility: ≥ 2.5 mg/mL (7.00 mM); Clear solution
此方案可获得 ≥ 2.5 mg/mL (7.00 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
靶点:
α7 nAChR
体外研究:
Encenicline (EVP-6124) displaces [3H]-MLA (Methyllycaconitine) (Ki=9.98 nM, pIC50=7.65±0.06, n=3) and [125I]-α-bungarotoxin (Ki=4.33 nM, pIC50=8.07±0.04, n=3). Encenicline (EVP-6124) is approximately 300 fold more potent than the natural agonist ACh (Ki=3 μM), measured in binding assays using [3H]-MLA. Encenicline hydrochloride inhibits the 5-HT3 receptor by 51% at 10 nM, the lowest concentration tested. Evaluation of the human 5-HT2B receptor expressed in CHO cells demonstrates displacement of [3H]-mesulergine (Ki=14 nM) and only antagonist activity in the rat gastric fundus assay at an IC50 of 16 μM. In binding and functional experiments, Encenicline (EVP-6124) shows selectivity for α7 nAChRs and does not activate or inhibit heteromeric α4β2 nAChRs.
体内研究:
Encenicline hydrochloride has good brain penetration and an adequate exposure time. Encenicline hydrochloride (0.3 mg/kg, p.o.) significantly restores memory function in scopolamine-treated rats (0.1 mg/kg, i.p.) in an object recognition task (ORT). Although donepezil at 0.1 mg/kg, p.o. or Encenicline hydrochloride at 0.03 mg/kg, p.o. did not improve memory in this task, co-administration of these sub-efficacious doses fully restored memory. In a natural forgetting test, an ORT with a 24 h retention time, Encenicline hydrochloride improved memory at 0.3 mg/kg, p.o. This improvement is blocked by the selective α7 nAChR antagonist methyllycaconitine (0.3 mg/kg, i.p. or 10 μg, i.c.v.). Encenicline hydrochloride is found to bind moderately to rat plasma proteins with a mean fu of 0.11±0.01 (mean±SD) or 11%. Over a range of 0.1-30 mg/kg, p.o., Encenicline hydrochloride demonstrates proportional dose escalation. Tmax is at 4 h in plasma and 2 h brain, although the brain concentrations remained similar between 2 and 8 h. The B:P ratios are 1.7-5.1 between 1 and 8 h. Pharmacokinetic studies have shown that Encenicline hydrochloride (0.4 mg/kg, i.p.) reaches peak brain concentration 2 hr after administration and remains at effective concentrations for at least 4 hr. Encenicline hydrochloride is administered to WT mice at ZT0 (0.4 mg/kg i.p single dose) and significantly increases the saturation index of NMDARs in slices obtained 4 hr later without causing prolonged wakefulness or enhanced locomotor activity .
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
保存条件:
2-8°C 干燥密封
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):