中文名称: β-多西环素
英文名称: 6-Epidoxycycline
CAS No: 564-25-0
分子式: C22H24N2O8
分子量: 444.1
EINEC: 209-271-1
D10670 β-多西环素 化学对照品 (psaitong)
包装规格:
50mg in glass bottle
产品简介:
一种四环素抗生素,口服有效的,广谱的金属蛋白酶抑制剂,具有抗菌活性。
溶解性:
DMSO :125 mg/mL (281.26 mM; Need ultrasonic)
Water:< 0.1 mg/mL (ultrasonic;warming;heat to 60°C) (insoluble)
储备液保存:
-80°C, 6 months
-20°C, 1 month
(sealed storage, away from moisture)
体内实验:
1、请依序添加每种溶剂: 10% DMSO→40% PEG300→5% Tween-80→45% saline
Solubility: ≥ 2.08 mg/mL (4.68 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL (4.68 mM,饱和度未知) 的澄清溶液。
以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。
2、请依序添加每种溶剂: 10% DMSO→90% (20% SBE-β-CD in saline)
Solubility: ≥ 2.08 mg/mL (4.68 mM); Clear solution
此方案可获得 ≥ 2.08 mg/mL (4.68 mM,饱和度未知) 的澄清溶液。
以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
靶点:
Tetracycline
体外研究:
Doxycycline (0.01-10 µg/mL, 4 d) affects growth of glioma cells only under high concentrations.
Doxycycline (0.01-10 µg/mL, 24 h) decreases MT-CO1 protein content with concentrations of 1 µg/mL and higher in SVG cells.
Doxycycline (100 ng/mL, 1 µg/mL; 24 h) reduces proliferation of human cell lines.
Doxycycline (0-250 μM, 72 h) inhibits cell viability of breast cancer cells.
体内研究:
Doxycycline (oral gavage; 200 or 800 mg/kg; once daily; 3 months) reduces MMP-9 activity in untreated HT mice in a dose-dependent manner.
Doxycycline and Tetracycline (HY-A0107), act systemically after absorption from the upper gastrointestinal tract. The main advantage of Doxycycline over Tetracycline is its longer activity, and it can be taken twice or once a day. The peak concentration of both drugs is similar, but in the case of Doxycycline the time to peak concentration is shorter, and half life is significantly longer.
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
保存条件:
2-8℃
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):