中文名称: | C527 | ||||
---|---|---|---|---|---|
英文名称: | C527 | ||||
别名: | 2-(4-氟苯基)萘并[2,3-d]恶唑-4,9-二酮 C527;2-(4-Fluorophenyl)-naphth[2,3-d]oxazole-4,9-dione;2-(4-Fluorophenyl)naphtho[2,3-d]oxazole-4,9-dione | ||||
CAS No: | 192718-06-2 | 分子式: | C17H8FNO3 | 分子量: | 293.25 |
CAS No: | 192718-06-2 | ||||
分子式: | C17H8FNO3 | ||||
分子量: | 293.25 |
基本信息
产品编号: |
C10914 |
||||
产品名称: |
C527 |
||||
CAS: |
储存条件 |
粉末 |
2-8℃ |
四年 |
|
|
|
||||
分子式: |
溶于液体 |
-80℃ |
|
||
分子量 |
293.25 |
-20℃ |
|
||
化学名: |
2-(4-Fluorophenyl)naphtho[2,3-d]oxazole-4,9-dione |
||||
Solubility (25°C): |
|||||
体外:
|
DMSO |
< 1mg/mL (insoluble or slightly soluble) |
|||
Ethanol |
|
||||
Water |
< 0.1mg/mL (insoluble) |
||||
体内(现配现用): |
|
||||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
生物活性
产品描述 |
是泛 DUB 酶的抑制剂,对 USP1/UAF1 复合物活性较高, IC50 值为0.88μM。 |
靶点 |
0.88μM (USP1) |
体外研究 |
Pretreatment of USP1/UAF1 with C527 resulted in inhibition of its enzyme activity with an IC50 of 0.88±0.03μM. C527 inhibits the DUB activity of the USP12/USP46 complex and other DUB enzymes in vitro. However, the IC50 of C527 for these DUB enzymes was higher in comparison with USP1/UAF1 complex. C527 has considerably less inhibitory effect on UCH-L1 and UCH-L3, a different subclass of DUB enzymes. C527 treatments causes an increase in the levels of Ub-FANCD2 and Ub-FANCI. Pretreatment of cells with the C527 causes an enhancement in the cytoxicity of mitomycin C and camptothecin. C527 treatments lead to an increase in ubiquitinated forms of FANCD2 and FANCI, cause a decrease in homologous recombination activity, and sensitize cells to DNA damaging agents |
推荐实验方法(仅供参考)
Cell Assay |
HeLa cells are treated with DMSO or C527 (0.5, 1, 5μM) in appropriate medium for 24 to 72 hours. The viable cell counts are determined using Trypan Blue staining, CellTiter-Glo reagent or MTT assay |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )