中文名称: | Benzamil hydrochloride hydrate | ||||
---|---|---|---|---|---|
英文名称: | Benzamil hydrochloride hydrate | ||||
别名: | N-(Benzylamidino)-3,5-diamino-6-chloropyrazinecarboxamide hydrochloride hydrate | ||||
CAS No: | 161804-20-2 | 分子式: | C13H14ClN7O.HCl.XH2O | 分子量: | 356.21 |
CAS No: | 161804-20-2 | ||||
分子式: | C13H14ClN7O.HCl.XH2O | ||||
分子量: | 356.21 |
基本信息
产品编号: |
B70010 |
||||
产品名称: |
Benzamil hydrochloride hydrate |
||||
CAS: |
161804-20-2 |
储存条件 |
粉末 |
2-8℃ 避光 干燥 |
四年 |
|
|
||||
分子式: |
溶于液体 |
-80℃ |
6个月 |
||
分子量: |
356.21 |
-20℃ |
1个月 |
||
化学名: |
N-(Benzylamidino)-3,5-diamino-6-chloropyrazinecarboxamide hydrochloride hydrate |
||||
Solubility (25°C): |
|||||
体外:
|
DMSO |
|
|||
Ethanol |
'mg/mL |
||||
Water |
|
||||
体内(现配现用): |
请根据您的实验动物和给药⽅式选择适当的溶解⽅案。以下溶解⽅案都请先按照In Vitro⽅式配制澄清的储备液,再依次添加助溶剂:为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的⼯作液,建议您现⽤现配,当天 使⽤;以下溶剂前显⽰的百分⽐是指该溶剂在您配制终溶液中的体积占⽐;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的⽅式助溶。 1.请依序添加每种溶剂:10% DMSO 40% PEG300 5% Tween-80 45% saline Solubility:≥2.5mg/mL(7.02mM);Clear solution 2.请依序添加每种溶剂:10% DMSO 90%(20% SBE-β-CD in saline) Solubility:≥2.5mg/mL(7.02mM);Clear solution 3.请依序添加每种溶剂:10% DMSO 90% corn oil Solubility:≥2.5mg/mL(7.02mM);Clear solution |
||||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1mM |
2.8073mL |
14.0367mL |
28.0733mL |
5mM |
0.5615mL |
2.8073mL |
5.6147mL |
10mM |
0.2807mL |
1.4037mL |
2.8073mL |
生物活性
产品描述 |
一种钠通道(ENaC)的特异性阻断剂。 |
|
靶点 |
Na+/Ca2+Exchanger |
Sodium Channel |
体外研究 |
Benzamil hydrochloride (Benzylamiloride hydrochloride) inhibits neuronal and heterologously expressed small conductance Ca2+-activated K2+ channels. |
|
体内研究 |
Benzamil hydrochloride (Benzylamiloride hydrochloride) (0.7mg/kg/day;s.c.) treated stroke-prone spontaneously hypertensive rats (SHRSP) survived,on average,until 16.1 weeks of age in SHRSP rats. |
推荐实验方法(仅供参考)
细胞实验: |
|
Individual CCD segments are dissected from rabbit and mouse kidney.The measurements of [Na+]i are used as a reflection of Na+ transport across the apical membrane.EnaC-specific activity is assessed by applying 10−6 M of the ENaC blocker Benzamil hydrochloride,a concentration that does not affect Na+:H+ exchange.Experiments are performed in the presence/absence of luminal Benzamil hydrochloride or the Na:H exchanger blocker HOE694 administers with/without the AT1 receptor blocker candesartan.Final DMSO concentrations are below 0.1%. |
动物实验: |
|
For the acute intracerebroventricular injection in anesthetized rats.A guide cannula is inserted into the right lateral cerebral ventricle,and Benzamil hydrochloride (0.1nmol/kg,n=6;1nmol/kg,n=6;10nmol/kg,n=7) or vehicle (n=6) is injected into the right lateral ventricle through a cannula connected to a microsyringe 15 min before the start of intracerebroventricular infusion of hypertonic NaCl.Each injection consists of a volume of 10μL deliver manually over a period of 30s.To investigate the effects of Benzamil hydrochloride on the pressor response induced by intracerebroventricular injection of the pressor agent other than hypertonic NaCl,endothelin-1,which has a potent pressor action in the brain of rats,is intracerebroventricularly injected (1nmol/10μL) 15 min after the intracerebroventricular preinjection of Benzamil hydrochloride (10nmol/kg,n=6) or the vehicle (n=6),and mean arterial pressure,heart rate,and abdominal sympathetic nerve firings are recorded for 20 min.Catheters are implanted into both the femoral artery and vein of 12-wk-old male rats anesthetized with urethan.Both catheters are filled with heparinized saline (50 U/mL).Fifteen minutes before the start of intracerebroventricular infusion of hypertonic NaCl,Benzamil hydrochloride (10nmol/kg,n=6) or vehicle (10μL,n=6) is injected into a tube connects to the femoral venous catheter by directly inserting the microsyringe,and 0.1ml of isotonic saline solution is injected through the catheter to deliver the contents into the venous circulation. |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )