中文名称: | Bax inhibitor peptide V5 | ||||
---|---|---|---|---|---|
英文名称: | Bax inhibitor peptide V5 | ||||
别名: | BAX INHIBITING PEPTIDE V5 (BIP-V5);BAX Inhibiting Peptide V5;Bax inhibitor peptide V5;BIP-V5;Val-Pro-Met-Leu-Lys | ||||
CAS No: | 579492-81-2 | 分子式: | C27H50N6O6S | 分子量: | 586.79 |
CAS No: | 579492-81-2 | ||||
分子式: | C27H50N6O6S | ||||
分子量: | 586.79 |
基本信息
产品编号:B10758 |
|||||
产品名称:Bax inhibitor peptide V5 |
|||||
CAS: |
579492-81-2 |
储存条件 |
粉末 |
-20℃ |
四年 |
|
|
||||
分子式: |
溶于液体 |
-80℃ |
六个月 |
||
分子量 |
586.79 |
-20℃ |
一个月 |
||
化学名: |
|
||||
Solubility (25°C) |
体外 |
DMSO |
|
||
Ethanol |
|
||||
Water |
|
||||
体内(现配现用) |
|
|
|||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1mM |
1.7042mL |
8.5209mL |
17.0419mL |
5mM |
0.3408mL |
1.7042mL |
3.4084mL |
10mM |
0.1704mL |
0.8521mL |
1.7042mL |
生物活性
产品描述 |
一种 Bax 诱导凋亡的抑制剂,主要用于癌症研究。 |
靶点/IC50 |
Bax |
体外研究 |
Bax inhibitor peptide V5 (BIP-V5; 0-50μM) reduces cell death in STF-cMyc cells but not in SW620 or NCI-H23 cells. BIPV5 does not result in any significant effect on cell cycle arrest at the G2/M phase. V5 treatment upregulates expression of antiapoptotic proteins Bcl-2 and XIAP by more than 3- and 11-fold and downregulates expression of apoptosis-inducing proteins Bax, Bad, and nuclear factor-κB-p65 by 10, 30, and nearly 50%, respectively. |
体内研究 |
Bax inhibitor peptide V5 (BIP-V5; 100μM) significantly improves islet function following isolation and improves islet graft function following transplantation in mice model. |
推荐实验方法(仅供参考)
细胞实验: |
|
Cells (2.5×104 cells/mL) are grown in 96-well plates in a final volume of 100μL/well. After 24h,cells are incubated with small molecules or vehicle (DMSO) for 48-96 h prior to harvest. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, a tetrazole (MTT) reagent (0.5mg/mL), is added to each well during the final 2h, and absorbance is measured. Cell growth is calculated as the ratio of absorbance obtained upon compound treatment to that obtained with vehicle (DMSO) treatment. |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )