中文名称: 鸡豆黄素A
英文名称: Biochanin A
CAS No: 491-80-5
分子式: C16H12O5
分子量: 284.26
EINEC: 207-744-7
B10129 鸡豆黄素A ≥98%(HPLC) (psaitong)
包装规格:
200mg in glass bottle
产品描述:

基本信息

产品编号:

B10129

产品名称:

Biochanin A

CAS:

491-80-5

 

储存条件

粉末

室温

四年

 

 

分子式:

C16H12O5

溶于液体

-80℃

两年

分子量

284.26

-20℃

一个月

化学名: 

5,7-Dihydroxy-4'-methoxyisoflavone

Solubility (25°C):

 

体外:

 

DMSO

56mg/mL (197.0mM)

Ethanol

16mg/mL (56.28mM)

Water

Insoluble

体内(现配现用):

1.请依序添加每种溶剂:10% DMSO40% PEG3005% Tween-8045% saline

Solubility: ≥ 2.5mg/mL (8.79mM); Clear solution

此⽅案可获得 ≥ 2.5mg/mL (8.79mM,饱和度未知) 的澄清溶液。 以 1mL ⼯作液为例,取 100μL 25.0mg/mL 的澄清 DMSO 储备液加到 400μL PEG300 中,混合均匀;向上述体系中加⼊ 50μL Tween-80,混合均匀;然后继续加⼊ 450μL ⽣理盐⽔定容⾄ 1mL

2.请依序添加每种溶剂:10% DMSO90% corn oil

Solubility: ≥ 2.5mg/mL (8.79mM); Clear solution

此⽅案可获得 ≥ 2.5mg/mL (8.79mM,饱和度未知) 的澄清溶液,此⽅案不适⽤于实验周期在半个⽉以上的实验。 以 1mL ⼯作液为例,取 100μL 25.0mg/mL 的澄清 DMSO 储备液加到 900μL ⽟⽶油中,混合均匀。

1mg/ml表示微溶或不溶。

普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。

制备储备液

 

浓度

 

溶液体积

质量

 

1mg

 

5mg

 

10mg

1mM

3.5179mL

17.5895mL

35.1791mL

5mM

0.7036mL

3.5179mL

7.0358mL

10mM

0.3518mL

1.7590mL

3.5179mL

50mM

0.0704mL

0.3518mL

0.7036mL

生物活性

产品描述

Biochanin A (4-Methylgenistein) 是O-甲基异黄酮,是黄酮类的一种天然有机化合物。

靶点

FAAH (rat) 

1.4µM

FAAH (mouse) 

1.8µM

FAAH (human) 

2.4µM

EGFR 

91.5µM

体外研究

Biochanin A被报到能够抑制表皮生长因子受体的蛋白酪氨酸激酶(PTK),IC50值为91.5µM。Biochanin A抑制小鼠、大鼠和人体内脂肪酸酰胺(FAAH)对0.5µM大麻素的水解作用,IC50值分别为1.8,1.4以及2.4µMBiochanin A能够抑制血清和EGF刺激的LNCaP和DU-145细胞的生长(对血清的IC50值为8.0到27 微克/毫升,对EGF的IC50值为4.3到15微克/毫升),但是对EGF受体酪氨酸的自身磷酸化没有显著作用。

体内研究

LD50:小鼠63毫克/千克(腹腔注射) 

推荐实验方法(仅供参考)

Kinase Assay

For experiments with FAAH, rat liver homogenates, mouse brain homogenates and membranes from COS7 cells transfected with the human enzyme are used. Frozen (−80°C) livers from adult C57BL/6 mice and frozen brains (minus cerebella) from adult Wistar or Sprague-Dawley rats are thawed and homogenized in 20mM HEPES, 1mMmgCl2, pH 7. The homogenates are centrifuged at ~35000×g for 20 min at 4°C. After resuspension in buffer followed by recentrifugation and a second resuspension in buffer, the pellets are incubated at 37°C for 15 min. This incubation is undertaken in order to hydrolyse all endogenous FAAH substrates. The homogenates are then centrifuged as above, recentrifuged and resuspended in 50mM Tris-HCl buffer, pH 7.4, containing 1mM EDTA and 3mMmgCl2. The homogenates are then frozen at −80°C in aliquots until used for assay. FAAH is assayed in the homogenates and in the COS7 cell membranes using 0.5µM (unless otherwise stated) [ 3H]AEA labelled in the ethanolamine part of the molecule. Blank values are obtained by the use of buffer rather than homogenate. In the experiments comparing effects of Biochanin A upon FAAH and FAAH-2, the same assay is used but with 16 nM [3H]oleoylethanolamide ([3H]OEA) as substrate and with an incubation phase at room temperature. The choice of OEA rather than AEA for FAAH-2 is motivated by the relative rates of hydrolysis: OEA is metabolized four times faster than AEA by FAAH-2, whereas for FAAH the rate of hydrolysis of OEA is about a third of that for AEA. When 0.5µM [3H]AEA is used as substrate, assay conditions for rat brain and mouse liver are chosen so that <10% of added substrate is metabolized. For the human FAAH samples, <5% of the [3H]AEA is metabolized in all cases. For 16 nM [3H]OEA, a limited supply of an expensive ligand meant that optimization is not possible, and the amount of substrate utilized is higher (34±1 and 0.5±0.1% for FAAH and its corresponding mock-transfected, respectively; 40±2 and 21±0.4 for FAAH-2 and its corresponding mocktransfected respectively)

 

 

Animal Administration

Mice

ICR mice are used for the behavioural tests measuring spontaneous activity (over a 10 min testing period), rectal temperature, ring immobility (over a 5 min testing period) and nociceptive threshold (tail flick tests). AEA and Biochanin A are dissolved in a vehicle consisting of ethanol, Emulphor-620 and physiological saline in a ratio of 1:1:18 v/v, and administered i.v. to the animals via the tail vein (injection volume 10µL/g body weight). The degree of antinociception is expressed as percentage of maximum possible effect (%MPE), defined as [(test-control time)/(10-control time)]×100.

保存条件:
室温
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):