中文名称: | Z-VAD-FMK | ||||
---|---|---|---|---|---|
英文名称: | Z-VAD-FMK | ||||
别名: | 2-氯苯丙胺; N-Benzyloxycarbonyl-Val-Ala-Asp(O-Me) fluoromethyl ketone;Z-Val-Ala-Asp(OMe)-FMK | ||||
CAS No: | 187389-52-2 | 分子式: | C22H30FN3O7 | 分子量: | 467.49 |
CAS No: | 187389-52-2 | ||||
分子式: | C22H30FN3O7 | ||||
分子量: | 467.49 |
基本信息
产品编号:Z10006 |
|||||
产品名称:Z-VAD-FMK |
|||||
CAS: |
187389-52-2 |
储存条件 |
粉末 |
-20℃ |
四年 |
|
|
||||
分子式: |
溶于液体 |
-80℃ |
六个月 |
||
分子量 |
467.49 |
-20℃ |
一个月 |
||
化学名: |
|
||||
Solubility (25°C) |
体外 |
DMSO |
93mg/mL (198.93mM) |
||
Ethanol |
2mg/mL warmed with 50ºC water bath (4.27mM) |
||||
Water |
Insoluble |
||||
体内(现配现用) |
2% DMSO+35 %PEG 300+2%Tween 80+ddH2O |
6mg/mL |
|||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1mM |
2.1391mL |
10.6954mL |
21.3908mL |
5mM |
0.4278mL |
2.1391mL |
4.2782mL |
10mM |
0.2139mL |
1.0695mL |
2.1391mL |
50mM |
0.0428mL |
0.2139mL |
0.4278mL |
生物活性
产品描述 |
Z-VAD(OMe)-FMK (Z-Val-Ala-Asp(OMe)-FMK) 是一种不可逆的 pan-caspase 抑制剂。Z-VAD(OMe)-FMK 是泛素 C 末端水解酶 L1 (UCHL1) 抑制剂。Z-VAD(OMe)-FMK 通过靶向 UCHL1 活性位点对 UCHL1 进行不可逆地修饰。 |
靶点/IC50 |
Pan-caspase |
体外研究 |
Z-VAD(OMe)-FMK (Z-Val-Ala-Asp(OMe)-FMK) is a broad-spectrum caspase inhibitor, has been shown to inhibit the intracellular activation of caspase-like proteases. The injection of Z-VAD(OMe)-FMK suppresses the caspase-3 activity in lung tissues, and significantly decreases the number of terminal dUTP nick-end labeling-positive cells.Z-VAD(OMe)-FMK effectively inhibits UCHL1's reaction with hemagglutinin-tagged ubiquitin vinylmethyl ester (HA-UbVME) at the concentration of 100μM.Z-VAD(OMe)-FMK is administered intraperitoneally at 1 hour before and 6 hours after SAH.Expression of caspase-3 and positive TUNEL is examined as markers for apoptosis. Z-VAD(OMe)-FMK suppresses TUNEL and caspase-3 staining in endothelial cells,decreases caspase-3 activation, reduces BBB permeability, relieves vasospasm,abolishes brain edema, and improves neurological outcome.Z-VAD(OMe)-FMK is a cell-permeable caspase inhibitor,efficiently blocks cell death induced by SMN deficiency. |
体内研究 |
The survival rate of mice is prolonged significantly by the injection of Z-VAD(OMe)-FMK (Z-Val-Ala-Asp(OMe)-FMK). All mice succumbed to LPS within 30 hours. By contrast, the mice treated with Z-VAD(OMe)-FMK survive significantly longer and 27% of the mice survived more than 7 days. |
推荐实验方法(仅供参考)
细胞实验: |
|
PCR products containing coding sequences for the dSMN (forward primer: 5′-TAA TAC GAC TCA CTA TAG GG AAG ACG TAC GAC GAG TCG-3′; and reverse primer: 5′-TAA TAC GAC TCA CTA TAG GG GTG GTG CTG GCT TCT TTC-3′; product length,601bps; bold and italics letters represent T7 promoter sequences) and control Drosophila Presenilin (dPsn) gene (forward primer: 5′-TAA TAC GAC TCA CTA TAG GG TG GCT GCT GTC AAT CTC-3′; and reverse primer: 5′-TAA TAC GAC TCA CTA TAG GG CGA TAG CAA CGC TTC TTG-3′; product length: 543bps) are obtained and gel-purified. Double-stranded RNAs (dsRNA) are generated by transcription with Ribomax T7 Transcription kit and digested with Rnase-free DNase. The dsRNA products are ethanol precipitated and annealed by incubation at 65℃ for 30 min and then slowly allowed to cool at room temperature.The annealed dsRNA products are analyzed on a 1% agaorse gel to ensure the majority of dsRNA existed as a single band.The dsRNA (2μg) and/or plasmid DNAs (2μg) are introduced into cells by using Cellfectin. Caspase inhibition is achieved by using 50μM of Z-VAD(OMe)-FMK in the culture medium. |
动物实验: |
|
Mice Mice used in this study are 5- to 6-week-old (20 to 22g) ICR males. Mice are injected with 30mg/kg LPS from E. coli serotype O111:B4 through the tail vein. A single intravenous injection of Z-VAD(OMe)-FMK (0.25mg) is made 15 minutes before LPS injection, followed by three intravenous injections of Z-VAD(OMe)-FMK (0.1mg each) per hour. Control mice are injected with the same volume of 1% DMSO in sterile saline. |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )