中文名称: 普拉泰 促销
英文名称: plitidepsin
CAS No: 137219-37-5
分子式: C57H87N7O15
分子量: 1110.3
P12980 普拉泰 ≥98% (psaitong)
包装规格:
1mg 5mg 10m 25mg in glass bottle
产品简介:
Plitidepsin (Aplidine) 是一种靶向 eEF1A2?(KD=80 nM) 的有效抗癌活性分子。Plitidepsin 有抗病毒活性,抑制 SARS-CoV-2 的 IC90 为 0.88 nM。Plitidepsin 通常用于多发性骨髓瘤和晚期癌症研究,具有 COVID-19 研究的潜力。
溶解性:
DMSO :100 mg/mL (90.06 mM; Need ultrasonic)
储备液保存:
-80°C, 6 months
-20°C, 1 month
(sealed storage, away from moisture and light, under nitrogen)
体内实验:
1、请依序添加每种溶剂: 10% DMSO→ 40% PEG300→ 5% Tween-80→45% saline
Solubility: 2.5 mg/mL (2.25 mM); Suspended solution; Need ultrasonic
此方案可获得 2.5 mg/mL (2.25 mM) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。
2、请依序添加每种溶剂: 10% DMSO→90% corn oil
Solubility: ≥ 2.5 mg/mL (2.25 mM); Clear solution
此方案可获得 ≥ 2.5 mg/mL (2.25 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。
以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
体外研究:
Plitidepsin (20 nM; 1 h) induces a dose-dependent decrease in VEGF secretion in MOLT-4 cells.
Plitidepsin (20 nM; 1 h) does not result in significant inhibition of VEGF-R1 mRNA in normal endothelial cells, which do express VEGFR-1 but do not secrete VEGF.
Plitidepsin inhibits SARS-CoV-2 with an IC90 of 1.76 nM. In hACE2-293T cells, Plitidepsin exhibits anti–SARS-CoV-2 activity with an IC90 of 0.88 nM. In an established model of human pneumocyte-like cells, Plitidepsin inhibits SARS-CoV-2 replication with an IC90 of 3.14 nM and a selectivity index of 40.4.
体内研究:
Plitidepsin (intraperitoneal injection; 0.3 mg/kg or 1 mg/kg; 2 hours before infection with SARS-CoV-2) significantly reduces SARS-CoV-2 infection in BALB/c mice expressing human ACE2. 0.3 mg/kg plitidepsin group results in a reduction of nearly 2 log units in SARS-CoV-2 viral titers in the lungs, and the 1 mg/kg group leads to a reduction of 1.5 log units relative to the vehicle control group.
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
保存条件:
-20°C
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):