中文名称: NFAT Transcription Factor Regulator
英文名称: NFAT Transcription Factor Regulator
CAS No: 245747-71-1
分子式: C17H10F6N4O2
分子量: 416.28
N12651 NFAT Transcription Factor Regulator ≥98% (psaitong)
包装规格:
1mg 5mg 10mg 25mg 50mg 100mg in glass bottle
产品简介:
NFAT Transcription Factor Regulator-1 是 IL-2 合成 的抑制剂,IC50 值为182 nM。
溶解性:
溶于DMSO (100mg/mL)
储备液保存:
-80°C, 2 years
-20°C, 1 year
体内实验:
1、请依序添加每种溶剂: 10% DMSO→40% PEG300→5% Tween-80→45% saline
Solubility: ≥ 5 mg/mL (12.01 mM); Clear solution
此方案可获得 ≥ 5 mg/mL (12.01 mM,饱和度未知) 的澄清溶液。
以 1 mL 工作液为例,取 100 μL 50.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。
2、请依序添加每种溶剂: 10% DMSO→ 90% corn oil
Solubility: ≥ 5 mg/mL (12.01 mM); Clear solution
此方案可获得 ≥ 5 mg/mL (12.01 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。
以 1 mL 工作液为例,取 100 μL 50.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

<1mg/ml表示微溶或不溶。
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
靶点:
IL-2:182 nM (IC50)
体外研究:
NFAT Transcription Factor Regulator-1 (compound example 19) inhibits IL-2 synthesis with an IC50 of 182 nM. NFAT Transcription Factor Regulator-1 inhibits human and rat PBMC proliferation with IC50s of 82 and 146 nM, respectively. NFAT Transcription Factor Regulator-1 is able to inhibit IL-4 and IL-5 production in human T-cell lines with similar potency to its effects on IL-2 release.
体内研究:
NFAT Transcription Factor Regulator-1 is found to have an inhibitory potency approximately 10-fold better than that of cyclosporine. Comparable inhibitory effects on T-cell IL-2 production are obtained with NFAT Transcription Factor Regulator-1 and cyclosporine at doses of 3.0 and 30 mg/kg, po, respectively. The efficacies achieved in monkeys in vivo for blocking T-cell cytokine production suggest that NFAT Transcription Factor Regulator-1 has potential similar to that of cyclosporine for use in transplantation.
注意事项:
1、为了您的安全和健康,请穿实验服并戴一次性手套操作。
2、以上信息仅做参考交流之用。
保存条件:
-20°C
UN码:
HazardClass:
危害声明:
安全说明:
搜索质检报告(COA)
参考文献 & 客户发表文献

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)

摩尔浓度计算公式

  • =
    *
    *
    *选择对应的单位 *空出希望得到的变量,填写另外两个变量

用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积

稀释公式

稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )

  • * = *

连续稀释计算器方程

  • 连续稀释

  • 初始浓度:
  • 稀释倍数:
  • 计算结果

  • C1=C0/X C1: LOG(C1):
    C2=C1/X C2: LOG(C2):
    C3=C2/X C3: LOG(C3):
    C4=C3/X C4: LOG(C4):
    C5=C4/X C5: LOG(C5):
    C6=C5/X C6: LOG(C6):
    C7=C6/X C7: LOG(C7):
    C8=C7/X C8: LOG(C8):