中文名称: | L002 促销 | ||||
---|---|---|---|---|---|
英文名称: | L002 | ||||
别名: | L002;2,6-二甲基-2,5-环己二烯-1,4-二酮 4-[O-[(4-甲氧基苯基)磺酰基]肟] L002;4-[O-[(4-Methoxyphenyl)sulfonyl]oxime]-2,6-dimethyl-2,5-cyclohexadiene-1,4-dione;NSC764414 | ||||
CAS No: | 321695-57-2 | 分子式: | C15H15NO5S | 分子量: | 321.35 |
CAS No: | 321695-57-2 | ||||
分子式: | C15H15NO5S | ||||
分子量: | 321.35 |
基本信息
产品编号:L10390 |
|||||
产品名称:L002 |
|||||
CAS: |
321695-57-2 |
储存条件 |
粉末 |
-20℃ |
四年 |
|
|
||||
分子式: |
溶于液体 |
-80℃ |
六个月 |
||
分子量: |
321.35 |
-20℃ |
一个月 |
||
化学名: |
|
||||
Solubility (25°C) |
体外 |
DMSO |
|
||
Ethanol |
|
||||
Water |
|
||||
体内(现配现用) |
|
|
|||
<1mg/ml表示微溶或不溶。 |
|||||
普西唐提供的所有化合物浓度为内部测试所得,实际溶液度可能与公布值有所偏差,属于正常的批间细微差异现象。 |
|||||
请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;⼀旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 |
制备储备液
浓度
溶液体积 质量 |
1mg |
5mg |
10mg |
1mM |
3.1119mL |
15.5594mL |
31.1187mL |
5mM |
0.6224mL |
3.1119mL |
6.2237mL |
10mM |
0.3112mL |
1.5559mL |
3.1119mL |
生物活性
产品描述 |
一种有效的,细胞可渗透的,可逆的和特定的乙酰转移酶 p300(KAT3B) 抑制剂,IC50 为 1.98μM。 L002 结合乙酰辅酶 A 口袋并竞争性抑制 FATp300 催化结构域,阻断组蛋白乙酰化和 p53 乙酰化,且抑制 STAT3 激活。L002 有潜力用于高血压引起的心脏肥大和纤维化的研究。 |
||||
靶点/IC50 |
1.98uM (KAT3B) |
35µM (PCAF) |
STAT3 |
p53 |
|
体外研究 |
L002 also has weak inhibitory effects against PCAF and GCN5 (IC50s =35 and 34µM,respectively) and is specific for p300 over a panel of additional acetyltransferases,deacetylases,and methyltransferases. |
||||
体内研究 |
L002 (intraperitoneal injection;20μg/gm body weight; every 3rd day;2 weeks) reverses hypertension‐induced cardiac hypertrophy and fibrosis by treatment of mice after inducing hypertension for two weeks significantly.It also reduces the levels of perivascular and interstitial collagen in the myocardium compared to non-treated hypertensive mice. |
||||
Animal Model: |
Wild‐type C57BL/6 male mice planted with osmotic minipumps ( Angiotensin II 1500ng/kg/min) for 4 weeks |
||||
Dosage: |
20μg/gm body weight;every 3rd day;2 weeks |
||||
Administration: |
Intraperitoneal injection |
||||
Result: |
Reversed hypertension-induced cardiac fibrosis in mice. |
本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系,公式为:
质量 (g) = 浓度 (mol/L) x 体积 (L) x 分子量 (g/mol)
摩尔浓度计算公式
用本工具协助配置特定浓度的溶液,使用的计算公式为:
开始浓度 x 开始体积 = 最终浓度 x 最终体积
稀释公式
稀释公式一般简略地表示为:C1V1 = C2V2 ( 输入 输出 )